top of page

IF YOU NEED A COPY OF ANY PUBLICATION DON'T HESITATE TO CONTACT US

        Scientific articles, patents, books and chapters (since 2010)

 

2022

Ag5 nanoclusters with dual catalytic antiradical activities

IR Arias, D Buceta, G Barone, MC Giménez-López, H Lozano, M Lazzari, MA López-Quintela

Journal of Colloid and Interface Science 2022, 628, 437-447 [open access]

 

N- and S-Doped Carbons Derived from Polyacrylonitrile for Gases Separation

L Domínguez-Ramos, A Prieto-Estalrich, G Malucelli, D Gómez-Díaz, MS Freire, M Lazzari, J González-Álvarez

Sustainability 2022, 14, 3760 [open access]

2021

What Fate for Plastics in Artworks? An Overview of Their Identification and Degradative Behaviour

M Lazzari, D Reggio

Polymers 2021, 13 (6), 883 [open access]

 

An in-depth study on the agar gel effectiveness for built heritage cleaning

M Bertasa, C Canevali, A Sansonetti, M Lazzari, M Malandrino, R Simonutti, D Scalarone

Journal of Cultural Heritage 2021, 47, 12-20 [open access]

 

Biochemical characterization of Nostoc sp. exopolysaccharides and evaluation of potential use in wound healing

X Alvarez, A Alves, MP Ribeiro, M Lazzari, P Coutinho, A Otero

Carbohydrate Polymers 2021, 254, 117303 [read paper]

2020

Detection of bronze paint degradation products in a contemporary artwork by combined non-invasive and micro-destructive approach

N Macro, M Ioele, B Cattaneo, G De Cesare, F Di Lorenzo, M Storari, M Lazzari

Microchemical Journal 2020, 159, 105482 [read paper]

New insight on the oxidative degradation in materials used by Piero Gilardi in two second generation Nature Carpets: A micro-invasive spectroscopic approach

N Macro, M Ioele, M Brevi, G Scicolone, M Lazzari

Journal of Cultural Heritage 2020, 46, 278-282 [read paper]

Characterization of contemporary and historical acrylonitrile butadiene styrene (ABS)-based objects: Pilot study for handheld Raman analysis in collections

D Reggio, D Saviello, M Lazzari, D Iacopino

Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy 2020, 242, 118733 [read paper]

Dissolution of amorphous nifedipine from micelle-forming carboxymethylcellulose derivatives

E Bordallo, M Torneiro, M Lazzari

Carbohydrate Polymers 2020, 247, 116699 [read paper]

Some Guidelines for the Synthesis and Melting Characterization of Azide Poly(ethylene glycol) Derivatives

D González-Fernández, M Torneiro, M Lazzari

Polymers 2020, 12 (6), 1269 [open access]

A simple multi-analytical approach for the detection of oxidative and biological degradation of polymers in contemporary artworks

N Macro, M Ioele, M Lazzari

Microchemical Journal 2020, 157, 104919 [read paper]

A Global View on Block Copolymers

M Lazzari, M Torneiro

Polymers 2020, 12 (4), 869 [open access]

Poly-materials contemporary artworks by Sante Monachesi and Lucio Fontana: Study of materials and techniques

N Macro, M Ioele, M Lazzari

in Science and Digital Technology for Cultural Heritage-Interdisciplinary Approach to Diagnosis, Vulnerability, Risk Assessment and Graphic Information Models - Ortiz Calderón, Pinto Puerto, Verhagen and Prieto Eds., CRC Press 2020, pp. 333-337 [read chapter]

Some applications of a novel surface enhanced Raman spectroscopy (SERS)-based strategy for the detection of art materials

M Lazzari, D Reggio

in Science and Digital Technology for Cultural Heritage-Interdisciplinary Approach to Diagnosis, Vulnerability, Risk Assessment and Graphic Information Models - Ortiz Calderón, Pinto Puerto, Verhagen and Prieto Eds., CRC Press 2020, pp. 328-332 [read chapter]

2019

Stable polymer composites

M.A. López Quintela, M. Lazzari

WO Patent App. WO2020094700A1 [read application]

 

Linseed oil as a model system for surface enhanced Raman spectroscopy detection of degradation products in artworks

M. Gómez, D. Reggio, M. Lazzari

J. Raman Spectr.  2019, 50, 242–249 [open access] [cover]

Detection of degradation markers from polymer surfaces by a novel SERS-based strategy

M. Gómez, D. Reggio, M. Lazzari

Talanta  2019, 191, 156-161 [open access]

 

2018

Relaxation Dynamics in Polyethylene Glycol/Modified Hydrotalcite Nanocomposites

R. Arrigo, D. Antonioli, M. Lazzari, V. Gianotti, M. Laus, L. Montanaro, G. Malucelli

Polymers  2018, 10, 1182 [open access]

Surface enhanced Raman scattering (SERS) in the visible range on scalable aluminum-coated platforms

M. Gómez, S. Kadkhodazadeh, M. Lazzari

Chem. Commun.  2018, 54, 10638-10641 [open access]

Polymer Assisted Deposition of epitaxial oxide thin films

J. Vila-Fungueiriño, B. Rivas-Murias, J. Rubio-Zuazo, A. Carretero-Genevrier, M. Lazzari, F. Rivadulla

J. Mater. Chem. C  2018, 6, 3834-3844 [read paper]

 

Tetraphenylmethane shape-persistent dendritic polymers as versatile multifunctional materials

M. Torneiro, S. Campana, D. Gonzalez-Fernandez, J. I. Urzua, M. J. Roca, M. Lazzari, A. Rumbo

Abstracts of Papers of the American Chemical Society 2018, Vol. 256, 380-POLY

Density, Speed of Sound, Viscosity, and Surface Tension of Hexamethylenetetramine Aqueous Solutions from T = (293.15 to 323.15) K

D. Gómez-Díaz, J.M. Navaza, A. Rumbo

J. Chem. Eng. Data  2018, 63 (10), 3846-3850 [read paper]

Carbon dioxide chemical absorption by solvents based on diamine and amines blend

A. Cachaza, D. Gómez‐Díaz, A. Montáns, J.M. Navaza, A. Rumbo

AIChE J.  2018, 64 (7), 2702-2710 [read paper]

 

​Contemporary paints: Materials identification and fabrication techniques

D. Reggio, C. Garcia, M. Gómez, M. Lazzari, T. López-Morán

in Conserving Cultural Heritage – Mosquera & Almoraima Gil Eds., Taylor and Francis group 2018,  pp. 185-187 [read chapter]

                              

Nanotechnologies for contemporary art conservation: Some applications on plastics

M. Gómez, D. Reggio, M. Lazzari, I. Rodríguez-Arias, M.A. López-Quintela

in Conserving Cultural Heritage – Mosquera & Almoraima Gil Eds., Taylor and Francis group 2018,  pp. 181-183 [read chapter]

                              

2017

 

Divergent synthesis of porous tetraphenylmethane dendrimers

J.I. Urzúa, M. Torneiro

J. Org. Chem.  2017, 82 (24), 13231-13238 [read paper]

Carbon dioxide capture with tertiary amines. Absorption rate and reaction mechanism

A. García-Abuín, D. Gómez-Díaz, J.M. Navaza, A. Rumbo

J. Taiwan Inst. Chem. Eng.  2017, 80, 356-362 [read paper]

 

2016

 

Shape-persistent fluorescent tetraphenylmethane dendrimers

J. I. Urzúa, M. A. Regueira, M. Lazzari, M. Torneiro

Polym. Chem. 2016, 7, 5641-5645 [read paper]

A computational study of bulk porous two-dimensional polymers related to graphyne

A. Sánchez-González, J. A. Dobado, M. Torneiro

Phys. Chem. Chem. Phys. 2016, 18,  21305-21314  [read paper]

 

Tuning ordered pattern of Pd species through controlled block copolymer self-assembly

C. De Rosa, F. Auriemma, A. Malafronte, R. Di Girolamo, M. Lazzari, M. Nieto-Suarez, D. Hermida-Merino, I. W. Hamley, G. Portale

J. Phys. Chem. B  2016, 120, 6829–6841 [read paper]

Preparation and characterization of crosslinked chitosan/gelatin scaffolds by ice segregation induced self-assembly

M. Nieto-Suárez, M. A. López-Quintela, M. Lazzari

Carbohydrate Polymers 2016, 141, 175-183  [read paper]

 

2015

 

Self-assembly in aqueous solution of amphiphilic graft copolymers from oxidized carboxymethylcellulose

E. Bordallo, J. Rieumont, M.J. Tiera, M. Gómez, M. Lazzari

Carbohydrate Polymers 2015, 124, 43–49  [read paper]

 

Composite membranes with hydrophilic nanopores derived from the self-assembly of block copolymer supramolecular complexes

L. Iannarelli, R. Nistico, P. Avetta, M. Lazzari, G. Magnacca, P. Calza, D. Fabbri, S. Scalarone

Europ. Polym. J. 2015, 62, 108-115  [read paper]

 

Copolymers with acetyl-protected thiol pendant groups as highly efficient stabilizing agents for gold surfaces

D. González Fernández, M. Torneiro, M.A. López Quintela, M. Lazzari

RSC Adv. 2015, 5, 13722-13726 [read paper]

 

Room temperature ferromagnetism in thin films of LaMnO3 deposited by a chemical method over large areas

J.M. Vila Fungueiriño, B. Rivas Murias, B. Rodríguez González, O. Txoperena, D. Ciudad, L. Hueso, M. Lazzari, F. Rivadulla

ACS Appl. Mater. Interfaces 2015, 7(9), 5410-5414 [read paper]

CO2 chemical absorption in 3-amino-1-propanol aqueous solutions in BC reactor

J. Bentes, A. García-Abuín, A.G. Gomes, D. Gómez-Díaz, J.M. Navaza, A. Rumbo

Fuel Process. Technol.  2015, 137, 179-185 [read paper]

Carbon dioxide absorption behavior in 2-(ethylamino) ethanol aqueous solutions

I. Folgueira, I. Teijido, A. Garcia-Abuin, D. Gomez-Diaz, A. Rumbo

Fuel Process. Technol.  2015, 131, 14-20 [read paper]

 

2014

 

Advanced non-invasive fluorescence spectroscopy and imaging for mapping photo-oxidative degradation in acrylonitrile-butadiene-styrene: A study of model samples and of an object from the 1960s

D. Comelli, F. Toja, C. D’Andrea, L. Toniolo, G. Valentini, M. Lazzari, A. Nevin

Polym. Degrad. Stab. 2014, 107, 356-365 [read paper]

 

Durability of an industrial epoxy vinyl ester resin used for the fabrication of a contemporary art sculpture

Y. Rodriguez-Mella, T. López-Morán, M. A. López-Quintela, M. Lazzari

Polym. Degrad. Stab. 2014, 107, 277-284 [read paper]

 

Control on titania nanostructure by combining block copolymer assisted sol–gel synthesis with rapid flux solvent atmosphere treatment

G. Chieffi, R. Di Girolamo, A. Aronne, P. Pernice, E. Fanelli, M. Lazzari, M. Gómez, C. De Rosa, F. Auriemma

Eur. Polym. J. 2014, 59, 270-281 [read paper]

 

Reliable and cheap SERS active substrates

M. Gómez, M. Lazzari

Materials Today 2014, 17(7), 358–359 [open access] [cover]

 

Rapid-flux-solvent-atmosphere method for tailoring the morphology of titania substrates over a large area via direct self-assembly of block copolymers

G. Chieffi, R. Di Girolamo, A. Aronne, P. Pernice, E. Fanelli,M. Lazzari, C. De Rosa, F. Auriemma

RSC Adv. 2014, 4, 16721-16725 [read paper]

2-(Methylamino)ethanol for CO2 Absorption in a Bubble Reactor

I. Folgueira, I. Teijido, A. García-Abuín, D. Gomez-Diaz, A. Rumbo

Energy & Fuels 2014, 28 (7), 4737-4745 [read paper]

CO2 capture by pyrrolidine: Reaction mechanism and mass transfer

A. García‐Abuín, D. Gómez‐Díaz, J.M. Navaza, A. Rumbo

AIChE J. 2014, 60 (3), 1098-1106 [read paper]

 

Epoxy resins: from industrial material to contemporary art medium

M Lazzari, M Nieto-Suárez, T López-Morán

in Science, Technology and Cultural Heritage - Rogerio-Candelera Ed., Taylor and Francis group 2014, pp. 171-176 [read chapter]

 

2013

 

Synthesis of 1α,25-dihydroxyvitamin D3 analogues with α-hydroxyalkyl substituents at C12

D. M. Carballa, F. Zacconi, U. Kulesza, A. Mouriño, M. Torneiro

J. Steroid Biochem. Mol. Biol. 2013, 136, 34-38 [read paper                

 

Thermal annealing as an easy tool for the controlled arrangement of gold nanoparticles in block-copolymer thin films

A. Ledo-Suárez, C.E. Hoppe, M. Lazzari, M.A. López Quintela, I.A. Zucchi

Nanotechnology 2013, 24, 255304 [read paper]

 

The degradation of poly(vinyl acetate) as a material for design objects: A multi-analytical study of the Cocoon lamps. Part 2

F. Toja, D. Savello, A. Nevin, D. Comelli, M. Lazzari, G. Valentini, L. Toniolo

Polym. Degrad. Stab. 2013, 98(11), 2215-2223 [read paper]

 

Effect of cyclodextrins on the behaviour of insulin at the air–water interface: A Langmuir monolayer study

M. Nieto-Suárez, N. Blanco-Vila, N. Vila-Romeu

Thin Solid Films 2013, 548, 509-516 [read paper]

 

Thermal, rheological, and barrier properties of waterborne acrylic nanocomposite coatings based on boehmite or organo-modified montmorillonite

G. Malucelli, J. Alongi, E. Gioffredi, M. Lazzari

J. Therm. Anal. Calorim. 2013, 11, 1303-1310 [read paper]

 

Science and Technology for the Conservation of Cultural Heritage

M.A. Rogerio-Candelera, M. Lazzari, E. Cano (Eds.), Taylor and Francis Group 2013 [book preview]

 

The degradation of cellulose acetate: Advanced analytical tools for non-destructive study of design objects

F. Toja, L. Toniolo, A. Nevin, D. Comelli, M. Lazzari

in Science and Technology for the Conservation of Cultural Heritage - Rogerio-Candelera, Lazzari and Cano (Eds.), Taylor and Francis Group 2013, pp. 103-107 [read chapter]

 

Study of the long term stability of an industrial polyamide from a contemporary artwork

J.A. Fafian Labora, M. Lazzari, T. López Morán

in Science and Technology for the Conservation of Cultural Heritage - Rogerio-Candelera, Lazzari and Cano (Eds.), Taylor and Francis Group 2013, pp. 127-130 [read chapter]

 

2012

 

Synthesis of (1a)-1,25-Dihydroxyvitamin D3 with a b-Positioned Seven-Carbon Side Chain at C(12)

D. M. Carballa, A. Rumbo, M. Torneiro, M. Maestro, A. Mouriño

Helv. Chim. Acta 2012, 95, 1842-1850 [read paper]

 

Synthesis and Biological Evaluation of 1a,25-Dihydroxyvitamin D3 Analogues with a Long Side Chain at C-12 and Short C-17 Side Chains

D. M. Carballa, S. Seoane, F. Zacconi, X. Pérez, A. Rumbo, S. Álvarez-Díaz, M. J. Larriba, R. Pérez-Fernández, A. Muñoz, M. Maestro, A. Mouriño, M. Torneiro

J. Med. Chem. 2012, 55, 8642-8656 [read paper]

 

PFPE-based materials for the fabrication of micro- and nano-optical components

M. Gómez, M. Lazzari

Microelectron. Eng. 2012, 97, 208–211 [read paper]

 

Degradation of poly(vinyl acetate) as a material for design objects: A multi-analytical study of the effect of dibutyl phthalate plasticizer. Part 1

F. Toja, D. Saviello, A. Nevin, D. Comelli, M. Lazzari, M. Levi, L. Toniolo

Polym. Degrad. Stab. 2012,  97, 2441–2448 [read paper]

 

Synthesis and Characterization of Nanocomposites of Thermoplastic Polyurethane with both Graphene and Graphene Nanoribbon Fillers

S. Scognamillo, E. Gioffredi, M. Piccinini, M. Lazzari, V. Alzari, D.Nuvoli, R. Sanna, D. Piga, G. Malucelli, A. Mariani

Polymer 2012,  53, 4019–4024 [read paper]

 

Synthesis and characterization of graphene-containing thermoresponsive nanocomposite hydrogels of poly(N-vinylcaprolactam) prepared by frontal polymerization

R. Sanna, D. Sanna, V. Alzari, D. Nuvoli, S. Scognamillo., M. Piccinini, M. Lazzari, E. Gioffredi, G. Malucelli. A. Mariani

J. Polym. Sci. Part A: Polym. Chem. 2012, 50, 4110–4118. [read paper]

 

Acrylic protective coatings modified with titanium dioxide nanoparticles: Comparative study of stability under irradiation

D. Scalarone, M. Lazzari, O. Chiantore

Polym. Degrad. Stab. 2012, 97, 2136–2142 [read paper]

 

2011

 

Synthesis and Biological Evaluation of 1a,25-Dihydroxyvitamin D3 Analogs Hydroxymethylated at C-26

M. A. Regueira, S. Samanta, P. J. Malloy, P. Ordóñez-Morán, D. Resende, F. Sussman, A. Muñoz, A. Mouriño, D. Feldman, M. Torneiro

J. Med. Chem. 2011, 54, 3950-3962 [read paper]

 

Porous and worm-like titanium dioxide nanostructures from PS-b-PEO block copolymer micellar solutions

D. Scalarone, J, Tata, F, Caldera, M, Lazzari, O, Chiantore

Mater. Chem. Phys. 2011, 128, 166-171 [read paper]

 

Durability of acrylic films from commercial aqueous dispersion: glass transition temperature and tensile behavior as indexes of photooxidative degradation

M. Lazzari, D. Scalarone, G. Malucelli, O. Chiantore

Prog. Org. Coat. 2011, 70, 116-121 [read paper]

 

Plastic matters: an analytical procedure to evaluate the degradability of contemporary works of art

M. Lazzari, A. Ledo-Suárez , T. López, D. Scalarone, M. A. López-Quintela

Anal. Bioanal. Chem., 2011, 399, 2939–2948 [read paper]

 

2010

 

Functional nanocomposites based on the infusion or in situ generation of nanoparticles into amphiphilic epoxy gels

A. Ledo-Suárez, J. Puig, I. A. Zucchi, C. E. Hoppe, M. L. Gómez, R. Zysler, C. Ramos, C. Marchi, S. A. Bilmes, M. Lazzari, M. A. López Quintela, R. J. J. Williams

J. Mater. Chem. 2010, 20, 10135-10145 [read paper]

 

Thermomechanical and Barrier Properties of UV-Cured Epoxy/O-Montmorillonite Nanocomposites

R. Peila, G. Malucelli, M. Lazzari, A. Priola

Polym. Eng. Sci. 2010, 50, 1400-1407 [read paper]

 

A comprehensive approach to the alignment and ordering of block copolymer morphologies

M. Lazzari, C. De Rosa

in Advanced Nanomaterials - Geckeler and Nishide (eds), Wiley‐VCH Verlag 2010, pp. 111-158 [read chapter]

 

 

IF YOU NEED A COPY OF ANY PUBLICATION DON'T HESITATE TO CONTACT US

bottom of page